M
DSP
DIGITAL
POWER AMPLIFIER
Page
12
/
your needs. When the limiter is in the on-control state, the overload light will light up.
6.2 Menu bar
6.2.1 File
Figure 6.2.1 File menu
As shown in Figure 6.2.1 "File" menu:
New Project: the software can create a model of demo device in this menu when the device is not connected.
New Device: increase simulation equipment, simulation equipment will not affect the existing equipment.
Open: open an existing device management project from the computer disk.
Save: save the current device management project in the computer disk.
Save as: save the current equipment management project as a file.
6.2.2 Device
Figure 6.2.2 Device menu
As shown in Figure 6.2.2 Device menu:
Devices: view or modify the upper and lower computer software information, device name and device IP address of the
device.
Channels: set the name of each input and output channel.
Channel copy: copy the parameters of the same type of channel.
