M
DSP
DIGITAL
POWER AMPLIFIER
Page
15
/
Figure 6.2.7
Port connection interface
6.5 Link
To set the parameters of multiple devices at the same time, click the "Link" button, and the network link interface as
shown in Figure 6.2.8 will pop up. Select the device that needs to be set at the same time in the left frame, move to the
link group in the middle frame, and then select the grouping setting parameters on the right, finally press the "OK" button
to make the grouping function effective. You can also use the same operation to correct the network grouping settings.
Figure 6.2.8 Net link interface
6.6 Device List
When the software scans or manually adds a new analog device, it will automatically add the corresponding device to
