M
DSP
DIGITAL
POWER AMPLIFIER
Page
33
/
archived parameter package files.
7.20 Firmware update
Click "System"-"Upgrade" in the menu bar of the software homepage interface in Figure 6.1, and the firmware upgrade
interface shown in Figure 7.15 will pop up.
Figure 7.15 Firmware upgrade interface
When the lower computer system of the device has been updated, after obtaining the upgrade file, you can open the
firmware upgrade interface as shown in the figure above. After selecting the corresponding upgrade file in the "Upgrade
File" column, click "Start Upgrade" in the upper right corner, and the system will automatically is transferred upgrade file
to the lower computer for upgrade operation, and the operation log is displayed in the progress box below. After the
upgrade is completed, the machine will restart automatically or manually restart the machine to complete the upgrade.
7.21 Dante using introduction
In input settings in the main interface, or function module INPUT
, set the channel input source to Dante mode
