IHI IC50, Руководство по эксплуатации

Страница: 34 / 104

CONTROLS
IC50 ENG 2-6
Engine throttle dial
Use this dial to adjust the engine speed and output.
High: Turn the dial to the
mark position.
Low: Turn the dial to the mark position.
Engine key switch
Use this switch to start and stop the engine.
•
OFF (stop) position
The key may be inserted and pulled out. All currents
are cut off. Fuel injection stops and the engine stops
when the key switch is set to the OFF position.
•
ON (run) and GLOW (preheat) positions
The electrical system is turned on.
The temperature sensor senses the temperature and
the engine is preheated automatically for 1 to 15
seconds.
The glow lamp is on during preheating.
•
START position
Set the key to this position to start the engine.
Release the hand from the key immediately after the
engine starts.
The key returns to the ON position automatically.
Parking switch
Push this switch to apply the parking brake.
ON:
Push down on the P mark position. The mark
lamp goes on.
OFF: Push down the no-mark position. The mark lamp
goes out.
Emergency stop switch
Use this switch if the brake does not work and the
machine does not stop when the travel lever is returned to
the neutral position while moving down a slope.
STOP: Push down on the STOP mark position. The
mark lamp goes on. The engine stops in
emergency and the machine stops traveling.
Reset: Push down on the no-mark position. The mark
lamp goes out.