IHI IC50, Руководство по эксплуатации, Страница: 42 / 104

OPERATION
IC50 ENG 3-2
BEFORE STARTING THE ENGINE
1. Sit on the seat, adjust it to allow free lever operations,
and fasten the seat belt.
2. Make sure that the travel lever (1) and dump lever (2)
are set at the neutral positions.
3. Make sure that the dump lever lock (3) is set at the
locked position.
4. Insert the key into the engine key switch, turn it to the
ON position, and check the following:
•
Engine preheating starts automatically. Make sure
that the glow lamp (4) is lit for 1 to 15 seconds and
goes out then.
•
Make sure that the engine oil pressure warning lamp
(5) and charge warning lamp (6) are on.
•
Make sure that the mark lamp of the parking switch
(7) is on.
•
Turn the light switch (8) and make sure that the head
lamps go on.
•
Turn the turn signal switch (9) and make sure that
the direction indicator lamps go on.
•
Push down the horn switch (10) and make sure that
the horn sounds.
Ask IHI’s sales service dealer for repair services, if some
abnormality is found in the above check.
Locked