IEMCA BOSS 338 HD, Руководство по эксплуатации и техническому обслуживанию, Страница: 19 / 214

2 - TECHNICAL INFORMATION Boss 338HD - 552HD
EN
2 - Pag. 3 / 3
• MAIN PARTS
A MAGAZINE; it stores the bars.
B BAR SELECTION DEVICE; it enables
the first bar to be lowered into the
guide channels and holds the
remaining bars in the magazine.
C GUIDE CHANNELS; they guide the
bars during machining.
D BAR PUSHER; it pushes the bar
during machining.
E FEED CHAIN; transmits the motion
from the motor drive to the bar
pusher.
F DRIVE SYSTEM; it moves the bar
pusher.
G FEEDING- REMOVAL DRIVE; it drives
the bar feeder parts that control bar
feeding into the collet and
subsequent bar remnant removal. It
also drives the bar feeder parts that
control guide channel
opening/closing and bar selection.
H CLAMPS; they hold the bar during
loading and removal from the collet
of the bar pusher.
L FACING DEVICE; it sends a signal
when the bar passes.
M REMNANT RECOVERY BOX; bar
remnants are dropped into this box
after removal from the bar pusher
collet.
N LUBRICATION PUMP; it delivers oil to
the guide channels.
P OIL RECOVERY DEVICE; it collects oil
flowing out of the guide channels.
Q HANDHELD KEYBOARD; it allows bar feeder programming and function activation.
R ELECTRIC CABINET; it houses the electrical control panel.
S LATHE
T GUIDE CHANNEL OPENING SHAFT
V ENCODER