5
FIRST IBIS-ArcSAR START UP
IDS GeoRadar S.r.l.
Confidential Information - Do Not Distribute
MNG/2017/0016 Rev 1.0 67/ 78
6.6
Wind Turbine Setup
If the Wind Turbine has been installed as optional, repeat the setup steps
as described in the Paragraph 5.14.
6.7
Panoramic Camera Setup
To supply the Panoramic Camera, it’s necessary to open the PSU door and
turn on the CAMERA switch (
Fig. 152 – Turning the CAMERA switch on (PSU Control module)
For the configuration of the Panoramic Camera during a new Controller
session wizard, please refer to the IBIS Controller User Manual [BD1].
6.8
Laptop Starting
1.
open the Laptop sliding drawer placed under the PSU modules;
2.
unscrew the knob on the right and pull out the sliding drawer;
Fig. 153 – CF31 laptop with cables connected
3.
supply the Laptop turning on the PC switch on the Control Module
Fig. 154 – PC Switch on Control Module
4.
the Laptop will be automatically turned on. Wait the loading of the
Operating System and the loading of the IBIS Controller software. In
any case the software can be run clicking on its desktop icon.
