5
FIRST ArcSAR SETUP
IDS GeoRadar S.r.l.
Confidential Information - Do Not Distribute
MNG/2017/0016 Rev 1.0 59/ 78
-
go on the Windows taskbar;
-
right click on the Network icon;
-
access
Open Network and Sharing
Center;
-
open the
Local Area Connection
link
;
-
open
Properties
;
-
select
Internet Protocol Version 4
;
-
click on
Properties
;
-
tick
Use the following IP address
and insert the new IP address,
Subnet mask and Default gateway.
Then click OK
-
reboot the computer
5.19
Controller General Settings
Before starting the setup for a new IBIS-ArcSAR session, it is recommended
to take possession of:
Digital Terrain Model (DTM) of the scenario to monitor. IBIS
Controller accepts following file formats: .dxf, Shapefiles, .xyz or
ASCII grid (.txt);
the EPSG code which is a unique value used to unambiguously
identify projected, unprojected, and local spatial coordinate system
definitions;
the IP address of IBIS Guardian software and the type of data transfer
(TCP or FTP).
For any further details, please refer to the IBIS Controller User Manual
[BD1].
5.20
End of the ArcSAR First Setup
To complete the first setup, turn off the PSU and GENSET Isolation Point
switches
