Confidential Information - Do Not Distribute
Fig. 119 – Lantronix DeviceInstaller: Assignment Method
5.
in IP Settings Tab, complete the three field (
IP Address
,
Subnet Mask
and
Default Gateway
) with the specific device addresses and click on
Next
;
Fig. 120 – Lantronix DeviceInstaller: IP Settings
6.
in the final Assignment Tab click on button
Assign
to complete the
operation. Then close Lantronix;
7.
check the right assignment of the device IP directly on Controller
software: Settings > Supply > Supply Controller Setup > insert the IP
PSC address > Test Connection.
Fig. 121 – Supply Controller Setup
5.18.2
Pointing Camera IP address
To change the IP address of the Pointing Camera, open the browser and
access the related
Hikvision
application webpage. The default IP address is
10.0.0.105.
