48
Innovative Circuit Technology Ltd.
•
Ensure the network card settings on your computer are configured for
accessing the IP address of the MPS. To access a panel with the default
IP address of 192.168.0.180 the typical network settings for your
computer are:
o
IP Address: 192.168.0.180
o
Subnet Mask: 255.255.255.0
o
Gateway: 192.168.0.1
•
If the HTTP port of the panel has been changed, you must append the
new port number to the URL used to access the panel. (See the
Network Setup
section) See the
Password Reset
section for details on
how to reset the port number to the factory default value.
•
If your network switch allows you to manually configure port speed and
duplex settings, turn-
on “
Auto Negotiation
” for the switch port that
the panel is connected to.
I forgot my password:
•
See the Password Reset section of the manual
I am not receiving e-mails from the panel:
•
Verify that the
Send-E-mail
checkboxes are ticked for any alarm
conditions for which you wish to receive e-mail notifications.
•
Verify your e-mail settings by going to the
Communications/Maintenance
page on the unit’s web GUI and clicking
on the
Send Test E-mail
button, to send a test message to your
designated recipient addresses. The
Send Test E-mail
box will show an
error message if the system is unable to send the e-mail.
•
Check on the
Communications/E-mail Setup
page and ensure the
SMTP Server
field is the correct address for your e-mail provider, and
the
SMTP Port
is correct. (Port should be 25 for most servers)
•
If your SMTP server requires SSL encryption, ensure the
SMTP Server
requires SSL
checkbox is ticked. Otherwise leave blank.
•
If your SMTP server requires authentication ensure that the
SMTP User
Name
and
SMTP Password
fields are correctly entered.
STATUS INDICATORS AND ALARMS
The status of the MPS Ultra system generally is indicated on the front graphic
display module on units equipped with the ICM, or via the network GUI on