Innovative Circuit Technology Ltd.
21
Alarm Inputs
The Alarm Inputs Status screen displays the current status of the four alarm inputs
provided on a power system equipped with the Intelligent Control Module. Use
these inputs to monitor voltage free external contact closures such as door
sensors, smoke alarm outputs or a water sensor.
The alarm input Status screen shows the state of these contacts, changing from
OK to ALARM when a contact activates. Configure the logic of the external contact
type selecting Normally Open (NO) or Normally Closed (NC) to activate the alarm
inputs using the Network GUI interface. The factory default setting has the alarm
inputs disabled; you must select a contact type for each input to enable it.
Alarm History
Scroll through the Alarm History screens to see the log of the 20 most recent
alarm events. These alarms may have been raised by any module experiencing an
alarm, or by one of the four external Alarm Inputs being triggered.
Scroll to choose parameter or sub-menu.
Press Enter to select that item for
adjustment
Press Enter to select setting to be changed
Scroll to choose Output to be changed
(On/Off control shown)
Scroll to change setting. Press Enter to
set, press Back
X
button to exit without
changing
Press Enter or scroll to see the Alarm
History log
Alarm Input Status screen