Innovative Circuit Technology Ltd.
23
off the AC power to the unit, then simultaneously press the ENTER and BACK
X
buttons for more than 15s while restoring the AC power. A new password will
then have to be re-entered as shown above if password protection is required.
Reset the network GUI password back to the factory default (user: admin, no pw)
by selecting
RESET COMM SETTINGS
in the Network Status front panel display
menu shown above.
OPERATION (Network GUI)
Connect to your Intelligent Power System via the Ethernet for full access to all
system settings, status, and alarm conditions. Each MPS Ultra is equipped with a
built in Web server that can be accessed via any standard web browser on a
network connected computer or phone. No additional software is required on
your device.
Log In to the Unit
1) Connect to the MPS Ultra by entering the IP address of the unit in the
location/address field of your browser as shown:
The default IP address of the unit is
192.168.0.180
but any MPS connected to a
network with a DHCP server will be assigned a different IP address automatically.
To find the assigned address, use the front graphic display interface on the power
system, and navigate to the NETWORK STATUS screen. Note the assigned IP
address displayed, and use this in your browser address field to access the unit
remotely.
You can also find the IP address of any ICT unit on a local network by running the
ICT
IP Address Discovery tool
, after installing it on your Windows computer
connected to the same network (tool available for download from ICT
http://www.ict-power.com/tools-utilities/
).
2) You will be prompted for a user name and password to log into the MPS Ultra
system’s
built-in server. The default user name is
admin,
and no password is
required as the factory default.
To log out of the ICT Modular Power System GUI, click on the Logout link on the
top right of your browser window. The system will also automatically log off the
user after 20 minutes of inactivity.