22
Innovative Circuit Technology Ltd.
The system date and time are normally set by the network. These may be
manually set, see Network GUI Operation, Communication Basic Setup section.
Network Status and Advanced Options
Scroll to the Network Status Screen to check the network connectivity,
IP address
of the system, and the assigned MAC address. Access the Advanced Options
screen by pressing the Enter button when on the Network Status screen to set or
clear a 4 digit
LCD Password
(to lock out the ICM Display adjustments after the
LOCKOUT TIMER has expired), set the display
Lockout Timer
duration (0 to
60minutes),
Comm Control Restart
to restart the controller without affecting any
of the device settings and without interrupting DC power to the output terminals,
or
Reset
Comm Settings
(sets GUI password, Communication settings, and IP
address to the factory defaults).
Note: You will be prompted to enter the LCD PASSWORD once it is activated,
when attempting to change any of the power system settings.
Password Reset (Front panel)
Always record the display password when set, as it must be entered to change
any supply settings. To clear the display password in cases where it is lost, switch
Scroll through the history screens to see
the 20 most recent Alarm events. Shows
the Module that raised the alarm, date,
and time when set, and cleared
Network Status Screen
Press Enter to move to the Advanced
Options screen
Scroll to choose parameter or sub-menu
Scroll to adjust setting (Display Password
setting shown) Press Enter to save each
setting, or Back
X
to exit with no change
Scroll to setting to be changed