46
Innovative Circuit Technology Ltd.
(Valid port numbers are in the range of 1 to 65535) See the
Network Setup
section for information on assigning new network ports.
You must also change the panel’s HTTP port from 80 if your local network has
another device (such as a panel, or web server) already using port 80.
3.
Configure HTTPS forwarding by repeating steps 2a to 2e with the HTTPS
port number that the panel is using. The default HTTPS port number is
443
.
Router Port Forwarding Screen
4.
Determine the WAN IP address of your router assigned by the ISP. With
the example router this information is on the
Status
tab, listed as
IP
Address
.
NOTE:
When using a dynamic IP address the router’s WAN IP address may change
from time to time without warning, depending on your ISP. In this case you
should obtain a Static IP address from your ISP (it will not change) which will
ensure more predictable access to the panel from a remote location. If a
static IP address is not available you can use a Dynamic DNS service such as
Dyn (
) to provide a stable address for the router.
5.
To access the panel over the internet type the WAN IP address of the
router in the location/address field of your browser, followed by a
colon and the HTTP port number the panel is using. (e.g.