20
Innovative Circuit Technology Ltd.
Load Distribution Module
The Load Distribution Module (LDM) provides a convenient way to include up to
twelve channels of remotely managed DC power distribution within the MPS Ultra
system. Front panel mounted hydraulic-magnetic circuit breakers give over
current protection for each channel, while independent current monitoring and
on-off control allow for complete remote management of the connected loads.
The removal of the LDM circuit breakers must be done at the factory; ensure you
are installing the correctly rated parts in the correct location prior to snapping in
place.
The LDM Status screen shows the output current for each of the four outputs,
plus indicates if a breaker is OPEN, and if an output has been switched OFF.
LDM Settings:
Each output on the LDM may be forced ON or OFF by using the
OUTPUT CONTROL
function.
Set a load current level alarm by adjusting the output overcurrent, or output
undercurrent threshold.
Press Enter to select parameter to adjust
Scroll to choose parameter in selected
sub-menu. Press Enter to select that
item for adjustment
A notification will automatically appear
indicating the results of a Discharge Test
at completion of the test
Press Enter to move from the Status
screen to the LDM Settings screen
LDM Status Screen (OFF = channel set to
off, OPEN = channel breaker tripped)