ICS ELECTRONICS 9099, Инструкция по эксплуатации

Страница: 66 / 178

3-20
3
Notes:
1. Parameter enclosed by [ ] - denotes factory default
2. Parameter enclosed by ( ) - denotes power on default
3. SCPI name ends with ? - denotes query only
4. Unless otherwise noted SCPI command is also a query
5. Keyword enclosed by [ ] - denotes optional use
6. Only a configuration command that has one of its parameters enclosed by [ ] can
change its parameter setting and have this setting stored in the 9099's Flash (with the
*SAV command).
7. The format for a SCPI list is (@1,2, n) or (@ 1:n). There must be a space between the
@ and the first number and parenthesis are required. A list of numbers is separated
by commas or uses a colon to denote a range of numbers.
8. Numeric entries conform to IEEE-488.2 section 7.7.2.4 for decimal numeric param-
eters.
9. ASCII formatted data is a series of decimal values (0-255) for each byte separated by
commas. e.g. 64, 132, 8
10. The CAL:DATe command stores the CAL:DATe parameter and the current configura-
tion in the 9099's memory
11. The CAL:DEFault command resets the 9099's settings to their default values. Cau-
tion - All user settings except network and the CAL:IDN string will be overridden by
this command.
12. Most parameters can be output in various numeric formats (radix). The parameters
with decimal 0-255 value ranges may also be output as HEX using #h00-#hFF or
Binary using #b00000000-#b11111111. Conversely, the parameters shown with HEX
(#h) values can also be output in Decimal.
TAbLE 3-2 SCPI COMMAND TREE (CONT'D)