ICS ELECTRONICS 9099 Скачать руководство пользователя страница 8

Страница: 8 / 178

1-4

1.4.

VXI-11 CONFORMANCE

The 9099 complies with the VXI-11.3 Specification.

1.4.1 RPC Protocol

The RPC protocol conforms to ONC RPC Version 2.

1.4.2 Sockets

The 9099's VXI-11 service supports 15 TCP/IP sockets for client communica-

tion with a maximum of 4 active sockets. The sockets are normally opened and

closed by the clients. The unit will close the socket and release all resources

if a broken connection is detected or when the link count goes to zero if Auto

Disconnect is enabled.

There is a separate socket for UDP RPC Port Mapper communication.

1.4.3 Channels

Supports Core, Abort and Interrupt channels. Core and Abort channels each use

a socket connection. A reverse Interrupt channel is a TCP/IP socket connection

that does not count against the 15 client communication sockets limit.

1.4.4 Device

Links and Locks

The 9099 supports a maximum of 64 device links and 64 locks that can be used

over multiple Core channels by one or more clients.

1.4.5 VXI-11

Interface Name

The 9099 has only one instrument personality and the default name is inst0.

The name may be changed to any 8 character string.

1.4.6 VXI-11.3

Supported Functions

The 9099 supports all VXI-11.3 functions including:

create_link

destroy_link

create_intr_channel destroy_intr_channel

device_lock device_unlock device_abort

device_read

device_write

device_clear

device_trigger

device_remote device_local device_readstb create_intr_channel

device_intr_SRQ device_enable_SRQ

Содержание 9099



















































































































































































Результаты поиска

Содержание 9099

Отзывы:

Похожие инструкции для 9099

Бренды по названию

Популярные бренды

ICS ELECTRONICS 9099, Инструкция по эксплуатации

Результаты поиска

Содержание 9099

Отзывы:

Похожие инструкции для 9099

Бренды по названию

Популярные бренды