ICS ELECTRONICS 9099, Инструкция по эксплуатации

Страница: 61 / 178

3-15
3
TAbLE 3-2 IEEE-488.2 COMMON COMMANDS
(CONTINUED)
COMMAND NAME DESCRIPTION
*IDN?
*OPC
*OPC?
*PSC<value>
*PSC?
*RCL <value>
Identification
Query
Operation
Complete
Command
Operation
Complete
Query
Power-On
Status Clear
Power-On
Status Clear Query
Recall
9099 returns its identification message as
four fields separated by commas. These fields
are: manufacturer, model, serial number and
hardware-firmware version and date e.g. ICS
Electronics, 9099, S/N 1406021, Rev. 00.00
ver 13.05.17. The IEEE-488.2 specification
requires four fields, a max length of 72 char-
acters and the word 'model' may not appear
in the IDN message. 'S/N' may appear in the
serial number field.
Causes the 9099 to generate the operation
complete message in the Standard Event Status
Register when all pending selected 9099 opera-
tions have been finished.
Reads bit 0 in the Event Status Register when
all pending selected 9099 operations have
been finished.
Controls the automatic power-on clearing of
the ESE, SRE and SCPI Enable and Transition
registers. *PSC 0 command clears the PSC flag,
saves the ESE, SRE and the SCPI Transition
and Enable register values and allows the 9099
to restore the saved register values and assert
SRQ upon power turn-on. *PSC 1 command
sets the PSC flag to 1 and enables the power-on
clear of the saved registers. When the PSC flag
is cleared, any change to the ESE, SRE and the
SCPI Transition and Enable register values is
saved in nonvolatile memory.
Queries the PSC flag value. A value of 0
indicates the registers will retain their saved
values. A value of 1 indicates the registers
will be cleared at power turn-on.
Restores the 9099 configuration from a copy
stored in its Flash by the last *SAV or Con-
figure Update command. *RCL 0 recalls the