ICS ELECTRONICS 9099, Инструкция по эксплуатации, Страница: 70 / 178

3-24
3
Keyword Default Description
Value
TAbLE 3-3 SCPI COMMANDS AND QUERIES
(CONTINUED)
a decimal value equal to the binary sum of the
data. Multiple words are separated by commas.
HEXL converts each four bit nibble into the ASCII
characters 0-9 and A-F. TABLE allows the user
to define his own character set. All talk strings
end with a linefeed. Values are ASCii | HEXL |.
i.e. ASCii example = 128,5,255
HEXL example = 8000, 05FF
CALibrate Starts the Calibrate Branch
:IDN <string> blank Sets the user IDN message. String is up to 72
characters and consists of four comma separated
fields (manufacturer, model code, serial number
and product revision) . e.g. ICS Electronics, 9099,
S/N 1509125, Rev 00.05 Ver 15.09.04 The word
'Model' may not be used in the IDN string. S/N is
a non-case sensitive serial number identifier and
must be present to display the user's serial number
on the Welcome page.
:DATe <date> 00/00/0000 Saves the date and the current configuration. date
is a 10 character string.
:DATe? Queries the calibration date. The response is
00/00/00 when the unit is not calibrated. Enter a
valid date to indicate when the unit is calibrated
or configured.
DEFault Resets the unit to its factory settings and resets
CAL:DATE to 00/00/0000. The network settings
and user IDN string are not reset. Do a CAL:DATE
command to set the calibration date.
:LOCK Off Disables the lockable configuration commands
listed in Table 1-3 when On. Locked commands are
not visible to the user. Value is 1(On) | 0(Off).