13
PBX EXTEnSIon
13-55
Transceiver Controller Telephone Connection screen
PBX Extension > Transceiver Controller Telephone Connection
■
Control
18
PTT-ON Tone ������
Select the PTT-on tone when any signal types shown above (
11
~
17
)
is set to “DTMF.”
(Default: 0)
• Range: 0 ~ 9, *, or #
L
Dial this number on the SIP phone to make a destination device start
transmitting.
L
If you enter the same value in both the PTT-on Tone and the PTT-oFF
Tone, you can toggle the destination device status by dialing this number.
19
PTT-OFF Tone ������
Select the PTT-oFF tone when any signal types shown above (
11
~
17
)
is set to “DTMF.”
(Default: 0)
• Range: 0 ~ 9, *, or #
L
Dial this tone on the SIP phone to make the destination device to stop
transmitting.
L
If you enter the same value in both the PTT-on Tone and PTT-oFF Tone,
you can toggle the destination device status by dialing this number.
20
Method ���������
Set the transmitting trigger to make a call from a transceiver controller
to the IP telephone system.
(Default: RTP)
•
VOX
: Starts dialing when the VoX detects voice data in the voice packet
that is received by the bridge interface through the RTP (Real-time
Transport Protocol).
•
RTP
: Starts dialing when the RTP (voice data packet) is longer than the set
period time in the Attack Time setting is received, regardless of if the
RTP includes voice data or not.
20
11
12
13
14
15
16
17
18
19
L
“PTT-on Tone” (
18
) and “PTT-oFF Tone” (
19
) are displayed only when any PTT Control Types from
“Group Call/All Call” (
11
) to “Individual Call to a Microphone” (
17
) are set to “DTMF.”
