10
IP LInE SEttIngS
10-2
■
SIP Server
IP Line Settings > IP Line
IP Line screen
Setting used for connecting the RoIP gateway to the Session Initiation Protocol (SIP) server.
1
Index ���������
Assign the index number for each setting entry.
• Range: 1 ~ 100
L
Click <Batch Setting Screen> if you wan to enter 2 or more SIP servers at
once. Refer to the SIP Server Batch Setting. (p.10-4)
2
IP Phone Number ����
Enter an IP phone number to use as a client of SIP server of up to 31
characters (0~9, #, *).
L
the number must be registered in the SIP server.
L
Only when Use Letters for Phone number is set to “Allow,” you can enter
capital and small letters as a phone number.
( PBX Advanced > Advanced Settings > SIP Settings > Use Letters for Phone
number)
3
SIP Server Address ���
Enter a server address or host name of up to 63 characters.
4
SIP Service Domain ���
Enter a service domain name of up to 63 characters.
5
User ID ���������
Enter an authentication user ID of up to 63 characters. Use the IP
phone number that is entered in (
2
).
6
Password �������
Enter an authentication password of up to 31 characters.
L
the entered password is masked like as “******”.
7
Registration Expiration �
Set the registration expiration time.
the connection information stored in the SIP server is discarded after
the set time has passed.
(Default: 600)
• Range: 60 ~ 28800 seconds.
8
Registration Renewal Timer
Set the registration renewal interval time to between 10 and 90%.
(Default: normal: 50, Exception: 50)
the interval is expressed by the ratio of the value set in Registration
Expiration (
7
) and the period of the normal and exception condition.
9
<Apply> ��������
Click to apply the settings.
10
<Reset> ��������
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
3
8
7
6
5
4
1
2
10
9
