6
TRANSCEIvER CoNTRoLLER
6-29
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■
Transceiver Settings
16
Message ��������
Select whether or not the IP100H can send messages.
(Default: Disable)
When “Enable” is selected, push the [FUNC] key on the IP100H once to
enter the Message selection screen.
L
Up to 10 messages of 32 characters or less can be programmed on the
[Messages] screen in the [Common Settings] menu.
L
Select the message number 1 to 10 in [Default Message] that is registered
on the [Message] screen.
All Call
IP100H transmits a message
Message selection screen
(TX)
Received message screen
(RX)
IP100FS transmits a message
Selected Call type
Selected or edited message
IP100H
Wireless
access point
VE-PG4
1/25 12:57
All Gather imme
Blinks
Scrolls
The IP100FS can store up to 100 messages
in each site.
You can edit the stored messages.
Message
All
Gather immedi
10
12
13
14
15
16
17
18
L
The screen shows when the Message (
16
) is set to “enable.”
11
