6
TRANSCEIvER CoNTRoLLER
6-43
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■
Transceiver Settings
37
Emergency Alert Tone ��
Select whether or not to sound an alarm when an Emergency call is sent.
When this item is set to “Disable,” “Emergency” is not displayed on the
screen, and IP100H sends the Emergency call.
(Default: Enable)
When “Enable” is selected, set the [Emergency Alert Tone Volume]
(audio level) of the alarm to between 0 and 32.
(Default: 32)
38
Call type ��������
Select the call type of Emergency call from Individual, Group, All, or
Telephone.
(Default: All)
If you select “Individual” or “Group,” enter the 4 digit Destination ID. If
you select “Telephone,” enter a Destination Phone Number of up to 31
characters (0–9, #, and *).
39
Cancel on Reply �����
Select whether or not to cancel the Emergency call when any RX code
is received.
(Default: Enable)
40
Cancel by Time �����
Select whether or not to cancel the Emergency call after the set period
of time has passed.
(Default: Disable)
If you select “Enable,” enter a period of time to between 1 and 255 seconds.
(Default: 60 (seconds))
33
34
35
40
36
38
39
37
Emergency: Enable
Emergency: Enable
Emergency: Enable
