6
TRANSCEIvER CoNTRoLLER
6-44
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■
Transceiver Settings
41
Alert Tone��������
Select whether or not to cancel an Emergency call after the set period
of time has passed.
(Default: Enable)
If you select “Enable,” set the Volume (audio level) to between 0 and
32, and select the action.
(Default: 32, Notification Beep+Vibration)
L
In the [Alert Tone Action], select “Notification Beep,” “Vibration,” or
“Notification Beep + Vibration” to activate when an Emergency call is
received.
42
Lone Worker ������
If the Lone Worker function is activated, the Emergency function is
automatically turned oN after the set period of time has passed with no
operation.
(Default: Disable)
43
Lone Worker ON Timer ��
Enter the period of time for starting the Lone Worker function.
(Default: 60 (minutes))
•
Range: 1 ~ 255 (minutes)
in 1 second steps
L
When the IP100H is operated within the period of time in this item, the times
for [Lone Worker ON Timer] (
43
) and [Lone Worker Reminder Timer] (
44
) are
reset.
41
42
43
44
45
(This is an example of when the [Lone Worker] (
42
) is set to “Enable.”)
Emergency: Enable
Emergency: Enable
Lone Worker: Enable
