6
TRANSCEIvER CoNTRoLLER
6-13
Area Call screen
Transceiver Controller > RoIP Server Settings > Area Call
■
Access Point Search
4
No. �����������
Select an area to register from a “Number” in [Area Setting].
When an area number that is already registered is selected, BSSID is
added to the area number.
L
If the area number is already registered in [Area Call], it cannot be selected.
L
An area number is selected, depending on the name that is registered
with the same Tenant (Fleet) Number in [IP Advanced Radio System] of an
access point, as shown below.
•
When the area number’s name is already registered in [Area Setting], the
area number is selected (A blank is also recognized as a part of the name).
•
When the area number’s name is not registered in [Area Setting], an
unused and initial area number is selected.
5
<Add> ���������
Click to register a discovered access point in [Access Point Search].
6
<Apply selection> ����
Click to register a selected access point in [Check Box] (
2
).
1
2
3
4
5
6
