8
DESTINATIoN SETTINGS
8-6
■
Destination Settings (All)
The settings to call all the registered wireless LAN transceivers (IP100H/IP100FS).
If necessary, you can include other bases connections, IP transceiver controllers, and transceiver ports. (Up to
22 locations, excluding the IP transceiver controller)
L
This screen is displayed when clicking [Edit] of [List of Destination Setting Entries (All Call)].
1
Communication Type ��
Select “Simplex” or “Full-Duplex.”
(Default: Full-Duplex)
•
Simplex operation
L
When “Simplex” is selected, the called station cannot reply until the caller
station stops transmitting.
This is an example of setting “All” as the Call Type.
Simplex operation
When “Simplex” is selected, the called station cannot reply until the caller station stops transmitting.
VE-PG4
Wireless access point
(Example: AP-95M)
IP100FS
(Remote Communicator)
IP100H
VE-PG4
Wireless access point
(Example: AP-95M)
IP100FS
(Remote Communicator)
Full-Duplex operation
IP100H
1
2
3
6
4
5
Destination Settings screen
Destination Settings > Destination Settings
•
Full-Duplex operation
