6
TRANSCEIvER CoNTRoLLER
6-78
Profile screen
Transceiver Controller > Common Settings > Profile
■
Profile
17
Courtesy Beep �����
Select a
Notice Tone
when a received call is finished. (Default: Tone 1)
L
This tone can be individually assigned to each call type, “Individual Call,”
“Group Call,” “All Call,” and “Telephone.”
L
You can select “Not Use” or “Tone 1” to “Tone 8.”
L
After each received call is completed, the IP100H will sound the specified tone.
18
Out of Service Area Notice
Tone ����������
Select whether or not the IP100H sounds the out of service area
Notice Tone
.
(Default: Disable)
When “Enable” is selected, the IP100H sounds the
Notice Tone
when it
goes out the service area or returns to the service area.
19
Sidetone Mute ������
Select whether or not the IP100H uses the Side Tone Mute function.
(Default: Disable)
When “Enable” is selected, the IP100H mutes the sidetone or monitor
audio when it goes out the service area. At that time, you cannot hear
your voice from a head set or earphone speaker.
L
When “Monitor” or “Sidetone” is set to “Disable” in the Transceiver Settings
menu, this function is not activated.
12
13
14
15
16
17
18
19
