6
TRANSCEIvER CoNTRoLLER
6-21
1
Unit ID ���������
Select the IP100H’s Individual number (Name) that you want to edit.
L
Only the individual numbers of the IP100H are selectable.
The individual number that the [Transceiver Model] on the [Transceiver
Registration] screen is set to “IP100FS,” cannot be selected.
2
Display Item ������
Select whether or not the IP100H displays the Date and Time or its
Name in the standby mode.
(Default: Date and Time)
L
If the [Name] on the [Transceiver Registration] screen has not been entered,
and this setting is set to [Name], the IP100H displays the individual number.
3
BackLight ��������
Select the IP100H backlight function.
(Default: Auto)
•
OFF
:
The backlight does not light.
•
ON
:
The backlight lights continuously.
•
Auto
:
The backlight lights when an operation is performed, and goes out
after 5 seconds.
4
Tx Inhibit ��������
Select “Enable” to inhibit the IP100H’s transmission. (Default: Disable)
L
When this setting is set to “Enable,” the IP100H also cannot transmit with an
optional microphone, or using the VOX function.
Transceiver Settings screen
■
Transceiver Settings
Individually assign the functions, or set the receive notification tone to a registered IP100H.
L
After the setting is completed, you must reboot the IP100H.
Transceiver Controller > Transceiver Settings > Transceiver Settings
(Date and Time)
(Name)
1
2
3
4
5
7
8
9
6
10/8 16
：
57
Sales 8
Sales 1
Sales 8
