13
PBX EXTEnSIon
13-66
Converter Bridge screen
PBX Extension > Converter Bridge
■
Control
5
Call Incoming ������
Select a notice Tone to send to notify a client transceiver that a call
from a SIP phone has arrived.
(Default: not used)
•
Not used
:
Does not send a notice Tone
(The transceiver automatically answers.)
•
Notice Tone 1 ~ 3
: Sends the selected notice Tone
( The transceiver can answer by pushing [PTT] between
the notice Tones.)
6
Dialing Notice Tone on the
Transceiver �������
Displayed when the “DTMF Dialig” (on the screen) is enabled.
(Default: not used)
7
Calling ���������
The notice Tone to send to a caller transceiver alerting that the target
SIP phone answered the call.
(Default: notice Tone 2)
8
Connection Success ���
The notice Tone to send to a caller transceiver alerting that the target
SIP phone has hung up the call.
(Default: notice Tone 2)
9
Disconnect �������
The notice Tone to send to a caller transceiver alerting that the call
could arrive at the target SIP phone.
(Default: notice Tone 3)
10
Connection Failure ���
The notice Tone to send to a caller transceiver alerting that the call
could arrive at the target SIP phone.
(Default: notice Tone 3)
11
Notice Tone Volume ���
Set the volume level of the notice Tones (
5
~
10
).
(Default: 0)
• Range: –12 (minimum) ~ +6 (maximum) (dB)
5
6
7
8
9
10
11
1
2
3
4
