5
GPS/GPS-A OPERATION
5-14
GPS memory operation
■
(Continued)
D
GPS alarm setting
A GPS alarm can sound when a target position comes
into the alarm area.
This function can be set to the caller station, all GPS
Memory channels, a specified Memory bank or a
specified Memory channel.
Example:
Alarm Area 1
Setting alarm to all GPS Memories.
Push [MENU]
q
.
Push D-pad(
w
) to select the root item (GPS), and
then push D-pad(Ent).
D-pad
(
�
)
(Ent)
Push D-pad(
e
) to select “GPS Memory,” and then
push D-pad(Ent).
Push D-pad(
r
) to select “ALL.”
•
If you wish to set the alarm to a GPS Memory
bank, select one between A to Z.
Push
t
.
Push D-pad(
y
) to select “Alarm ON,” and then push
D-pad(Ent).
•
When the alarm is set, is displayed next to the
item.
u
Push [MENU]
to exit the Menu screen.
•
When either one of the stations in a specified group
enters its set range, the beep sounds three times.
•
When the GPS alarm beeps, “GPS ALARM” pops
up on the screen and then the
S
icon blinks.
•
To cancel the GPS alarm, repeat step
t
and se-
lect “Alarm OFF.”
The pop up is
displayed and
beeps 3 times.
S
blinks
When alarm
is set, is
displayed.
0.25’
0.25’
0.25’
0.25’
N
Your
position
Your
position
Extended range
(approx. 1 km; 1094 Y)
Limited range
(approx. 500m; 547Y)
Beeps one times
Beeps three times
Beeps three times
When all channels or bank is selected:
Alarm area 1 (Setting plural stations)
When a specified memory is selected:
Alarm area 2 (Setting specific stations)
Point A
Point B
Point C
NOTE:
When “ALL” or a memory bank is selected, the
alarm functions depend on the “Alarm Area1” setting in
the Menu screen. (p. 10-24)
(MENU > GPS > GPS Set >
Alarm Area 1
)
•
GPS Alarm beeping screen
Previous view
