Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 129

Страница: 129 / 293

VOICE MEMORY FUNCTION

6-18

You can also play back the voice memory data with a
PC.
However, the recorded information (frequency, date,
and so on) are not displayed.

• The OS is described as “Windows 7.”
• When you copy the voice memory data from the mi

croSD card to the PC’s hard disk drive, you also oper-
ate same as following steps for playing back data.

• (e.g.) A memory card reader (3rd party products) is

connected to the PC, and insert the microSD
card into the reader. Then playing back the
voice memory data in the card.

Connect the memory card reader to the PC, and

then insert the microSD card into the reader.

• If your PC has a microSD card drive, insert the card into

the drive.

Click [Computer] in the <Start> menu.

• Explorer appears.

Click [Removable Disk.]

Double-click the [ID-31] folder.

Double-click the [Voice] folder.

Double-click the folder in which the file you want to

play back is stored.

(e.g. 20110921 folder)

To play back the file, double-click it.

(e.g. 20110921_032854.wav)

Click

Double-click

NOTE:

• The playing operations are different by your using

playing software. Therefore, refer to the software’s
instruction manual for details.

• When the file does not play back, even if you dou

ble-click the file, download the playing software
(e.g. Windows Media

Player.)

■

Playing back the voice memory data with the PC

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды