Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 175

Страница: 175 / 293

PRIORITY WATCH

9-22

When a signal is received.

• When “ON” is selected.

When a signal is received on the priority channel,

the memory bank mode is automatically selected.
The “PRIO” icon blinks.

* The scan pause timer and resume settings are the

same as for a normal scan.

• When “Bell” is selected.

When a signal is received on the priority channel,

a beep sounds and the

“

”

icon blinks. The VFO

scan resumes.

Blinks

Appears

Blinks

Blinks
Blinks

During the VFO scan.

Checks the bank chan-
nel every 5 seconds.

Resumes in the VFO mode.

Automatically changes to the bank channel mode.

VFO SCAN AND BANK SCAN (Continued)

■

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды