7
MEMORY CHANNEL PROGRAMMING
7
7-13
■
Memory clearing
Contents of programmed memories can be cleared
(erased), if desired.
Hold down [S.MW]
q
for 1 second to enter the
Select Memory write mode.
• 1 short and 1 long beep sounds.
• The memory channel number blinks.
• DO NOT hold down [S.MW]
for more than 2 sec-
onds.
Rotate [DIAL] to select a desired memory channel
w
to be cleared.
• Select Call channels (C0 or C1) to erase a call channel,
or scan edge channels (0A/0B to 24A/24B) to erase a
scan channel.
Push
e
to open the Quick Menu screen.
Push D-pad(
r
) to select “Clear,” and then push D-
pad(Ent).
• The confirmation screen “Clear?” appears.
D-pad
(
�
)
(Ent)
t
Push D-pad(
) to select “YES,” and then push
D-pad(Ent) to clear the contents.
• After clearing, the display returns to the Select Memory
write mode.
• To cancel the memory clearing, select “NO” and push
D-pad(Ent.)
Push [CLR]
y
to exit the Select Memory write
mode.
• Returns to the previous screen viewed before entering
the Select Memory write mode in step
q
.
[DIAL]
[Example]: Clearing the memory channel 008.
Rotate [DIAL] to se-
lect a desired mem-
ory channel to be
cleared.
Push D-pad(
) to se-
lect “Clear,” and then
push D-pad(Ent).
Select “YES,” and
then push D-pad(Ent)
to clear the contents
The programmed con-
tents are cleared.
Returns to the screen
viewed before enter-
ing the Select Memo-
ry write mode.
Previous view
