Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 51 / 293

DR MODE <ADVANCED>

4-10

■

Automatic Reply function

When a call addressed to your own call sign is re-
ceived, the Automatic Reply function automatically re-
plies with your call sign. (Default: OFF)

Push [MENU]

Push D-pad(



) to select the root item (“DV Set”),

and then push D-pad(Ent).

Push D-pad(



) to select “Auto Reply,” and then push

D-pad(Ent).
Push D-pad(



) to select “ON” or “Voice.”

• ON : Replies to the call with your own call sign. (No

audio signal is sent)

• Voice : Replies to the call with your own call sign and the

recorded Auto Reply voice signal that is saved on
the microSD card for this function.

If no microSD card is inserted, or no voice signal

is saved, the transceiver replies to the call in the
same way as the “ON” option.

Push [MENU]

to exit the MENU screen.

NOTE:

• The Automatic Reply function is automatically

turned OFF, when you push [PTT].

• When this function is activated, the Power Save

function is disabled.

• The destination call sign is temporarily set for the

Automatic Reply function.

Sends your own call sign, in-
cluding the programmed memo
and the recorded Auto Reply
voice announcement.

To record the voice signal

You can record a voice announcement for the Auto
Reply function in “DV Auto Reply” on the MENU
screen. (p. 10-21)
(MENU > Voice Memo >

DV Auto Reply

)

• When “ON” is selected

Sends your own call sign,
including the programmed
memo. (No voice announce-
ment is sent)

• When “Voice” is selected

JA3YU

A/ID31

JA3YU

A/ID31

‘

Auto repl

y no

’

D-pad

(

�

)

(Ent)

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды