Icom D-STAR ID-31A; D-STAR ID-31E страница 276 Скачать руководство пользователя

Страница: 276 / 293

USING A MICROSD CARD

12-3

■

microSD card insertion and removal

Shows status

microSD card insertion

Turn OFF the transceiver.

Lift OFF the [micro SD] slot cover on the side pan-

el.
With the terminals facing the front, insert the card

into the slot until it locks in place, and makes a ‘click’

sound.

DO NOT

touch the terminals.

Firmly close the [micro SD] slot cover.

• If you use a brand new microSD card, format the mi

croSD card do the following steps.

• Formatting a card erases all its data. Before format

ting any programmed card, make a backup file onto
your PC.

Turn ON the transceiver.

Push [MENU]

Push D-pad(



) to select the root item (“SD Card”),

and then push D-pad (Ent).

Push D-pad(



) to select “Format,” and then push

D-pad (Ent).

• The confirmation screen “Format OK?” appears.

Push D-pad(



) to select “YES,” and then push D-

pad(Ent) to format.

• The formatting starts and the status is displayed.

After formatting, the display automatically returns to

the SD CARD menu.
Push [MENU]

to exit the MENU screen.

CAUTION:

After  a  microSD  card  is
attached,  firmly  close  the
[micro  SD]  slot  cover  as
shown to the right.

Wrong

Correct

Close the cover without
a gap.

Terminals facing

the front

microSD card

[micro SD] slot

Slot cover

D-pad

(

�

)

(Ent)

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды