10
MENU SCREEN OPERATION
10-16
Scan items (Continued)
■
Program Link
(Default: Refer to the diagram below)
Scan > Program Link(PROGRAM LINK)
The Program Scan Link sets the link function for program scans pro-
grammed in the program scan edge channels.
The selected programmed scan number also shows the frequency range.
The link function scans all frequencies in the scan range.
Default program link composition
...
Program Link
0
：
1
：
9
：
Edit Name
Delete
00
：
430.000-440.000
Program scan link number (0
〜
9)
Blank
programmed scan edge channel
*
The program scan edge channel “00” is set in “Program link No.0” as the
Default.
* A link setting can be added when more than two pairs of program scan edge chan-
nels are programmed.(p. 7-4)
NOTE:
The “Add” item will not be displayed when only one pair of pro-
grammed scan edge channels are programmed, or no programmed
scan channel (00 to 24) is left to add to the selected link channel.
Adding a program scan link
q
Push D-pad(
) to select a program scan link number between 0 and 9, where
you wish to assign a scan edge channel, and then push D-pad(Ent).
w
Push
.
Push D-pad(
e
) to select “Add,” and then push D-pad(Ent).
Push D-pad(
r
) to select a programmed scan number you wish to assign
to the selected link channel, and then push D-pad(Ent).
(For example: 01:434.000-439.000)
Push [MENU]
t
to exit the [MENU] screen.
Deleting the link channel
Push D-pad(
q
) to select the programmed scan link number that the
channel you wish to delete is assigned to, and then push D-pad(Ent).
Push D-pad(
w
) to select programmed scan number you wish to delete.
(For example: 01:434.000-439.000)
Push
e
.
r
Push D-pad(
) to select “Delete,” and then push D-pad(Ent).
• The channel is deleted.
Push [MENU]
t
to exit the Menu screen.
D-pad
(
�
)
(Ent)
Previous view
