Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 205

Страница: 205 / 293

MENU SCREEN OPERATION

10-18

■

Voice Memo items

<<REC Start>>

Voice Memo > QSO Recorder > <<REC Start>>

Push D-pad(



) to select “<<REC Start>>,” and then push D-pad(Ent).

•

“Recording started. ”appears and voice recording starts.
“<<REC Stop>>” item is displayed while recording.

•

Be sure to insert a microSD card into the transceiver before selecting
these items.

•

Once recording has started, the recording will continue, even the trans-
ceiver is rebooted.
To stop the recording, select “<<REC Stop>> ” and then push D-
pad(Ent).

Play Files

Voice Memo > QSO Recorder > Play Files(PLAY FILES)

Performs the following steps to play back the recorded audio onto the mi-
croSD card.
Push D-pad(Ent), and folders on the microSD card are displayed.

• These folders contain the stored files.

Be sure to insert a microSD card into the transceiver before selecting
these items.

Playing back

Push D-pad(



) to select the folder that includes the desired file to play

back, and then push D-pad(Ent).

D-pad

(

�

)

(Ent)

Push D-pad(



) to select the file to play back, and then push D-

pad(Ent).

• The VOICE PLAYER screen is displayed and the selected file is played back.
• See “Operation while playing back” for forwording or rewinding.

(p. 6-5)

Push [MENU]

or [CLR]

to stop the playback.

• Return to the file list screen.

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды