Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 84 / 293

GPS/GPS-A OPERATION

5-3

■

Checking GPS Position

You can check your current position.

Displaying Position Data

Push

to open the main Quick Menu screen.

Push D-pad(



) to select the “GPS position” item,

and then push D-pad(Ent).

The first MY GPS position screen appears. (1/5)

D-pad

(

�

)

(Ent)

Pushing D-pad(



) allows you to scroll through two

MY screen, two RX received screen and one Mem-
ory screen 1/5 to 5/5.

• My Position 1 :

Your position in Latitude, Longitude, el-

evation and time are displayed. A com-

pass heading is also displayed.

• My Position 2 : Your course in degrees and speed

in a selected format is displayed.

• RX Position 1 : The position of the station you are

receiving from in Latitude, Longi-

tude and the distance from the sta-

tion to you is displayed.

• RX Position 2 : The SSID, course, speed and alti

tude of the station you are receiv-

ing from is displayed.

Depending on the activity of the station

you are receiving from, some data may
not be displayed.

• MEM Position : The position of the memory chan

nel location in Latitude and Longi-

tude is displayed. Also, the distance

from you to the memory channel is

displayed.

NOTE:

Data entered manually in the “Manual Po-

sition” Edit option is not displayed.

(MENU > GPS > GPS Set >

GPS Select

)

See page 10-22 for details.

Push [CLR]

to cancel the GPS POSITION

screen and return to the operating screen.

MY Position 1

MY Position 2

Latitude

Compass

direction Top

is North

Your course

heading is

East

Longitude

Your course

heading is 90

degrees

RX Position 1

RX Position 2

MEM Position

Compass

direction Top

is North
The direction

of the station

you are

receiving

from.

The station is

north of you.

Latitude
Longitude

The

distance

from you to

the station

you are

receiving

from.

The course

heading of

the station

you are

receiving

from is 315

degrees.

The station

you are

receiving

from has

not entered

an SSID so

dashes are

displayed.

Compass

direction Top

is North

The direction

from you to

the memory

channel

location.

The memory

channel

location is

north of you.

Latitude
Longitude

The

distance

from you to

the memory

channel

location.

When a name has been

assigned to the memory

channel, the name is displayed

instead of the channel number.

NOTE:

The latitude, longitude and altitude may differ, de-
pending on your GPS selection of either the internal
or an external GPS receiver.
Also, the time may not be displayed, depending on
the external GPS.

• This is a graphic example of the GPS data screens to the right.

The station

you are receiving

from

Course is 315 degrees

Speed is 33.3 mph

105 ml

77.9 ml

GPS memory

channel is 01

Course is 88 degrees

Speed is 4.9 mph

Yourself

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды