background image

10

MENU SCREEN OPERATION

10-22

 

GPS items

GPS Select 

(Default: OFF)

GPS > GPS Set > GPS Select(GPS SELECT)

Select either an internal or external GPS receiver that the transceiver re-
ceives its position data from.

• OFF 

:  A GPS receiver is not used. 

• Internal GPS  :  Position data from the internal GPS data is used for the 

GPS functions.

• External GPS :  Position data from the external GPS data is used for the 

GPS functions. 

• Manual  

:  Manually enter the current Latitude, Longitude and Alti

-

tude in Manual Position.

 Slow-speed data communication is disabled when “External GPS” is selected. 
(p. 4-12)

Power Save (Internal GPS) 

(Default: Auto)

GPS > GPS Set > Power Save (Internal GPS)(POWER SAVE (INT GPS))

Select whether or not to use the internal GPS receiver power save func-
tion.
The power save function disconnects power to the GPS receiver to con-
serve battery power.
When this function is ON, and if the GPS receiver cannot receive signal 
from a satellite for 5 minutes, the power save function will turn OFF the 
GPS receiver for this set period of time.

• OFF 

: The receiver is continuously ON.

• 1, 2, 4, 8 min  :  When the receiver cannot receive any signal from a satel

-

lite for 5 minutes, the GPS receiver power is turned OFF 
for the selected periods (1, 2, 4 or 8 minutes). After this 
period, the receiver resumes receiving. 

• Auto 

:  When the receiver cannot receive any signal from a satel

-

lite for 5 minutes, the GPS receiver power is turned OFF 
for 1 minute. After this period, the receiver resumes re-
ceiving. 

 

   The power save interval time extends to 2, 4 and then 8 

minutes when receiving no signal for another 5 minutes, 
respectively. 

 

   Once the GPS receiver receives initial position data, the 

power save interval is set back to 1 minute, if it receives 
no signal for 5 minutes. 

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Отзывы: