IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 85 / 113

Table E-1 (Page 3 of 4). Novell NetWare Driver Parameters
Parameter Explanation
RT= Route Switching Mode. This parameter indicates whether the driver should enable code that
attempts to send routable traffic directly to a destination rather than through the router. This can
improve the performance of these connections and reduce the workload at the router. If the value
if Disable, all routable frames will be sent through the router.
Valid values:
A Automatically determines whether to use Peer or Client mode.
P Communicates with a peer destination station to establish a direct path.
C Uses an MSS server to determine the direct path.
D Deactivates the route switching function for this adapter.
The default is Disable.
RTTS= Route Switching Table Size. This parameter specifies the number of entries allowed in the route
table kept for Route Switching support. This should be set equal to or greater than the number of
remote stations this station will send data to using routable IP frames. If it is set too low, some of
the traffic that could be sent directly will instead be sent through the router.
Valid values: 16-1024
The default is 1024.
RTSM= Route Switching IP Subnet Mask. This parameter contains a character string specifying the IP
subnet mask for the IP subnet to which this adapter will attach. This value is entered as an IP
dotted-decimal value (for example, 255.255.255.0). This is a mandatory parameter when the
RTSWMode parameter is set to Auto or Peer.
Valid values:
xxx.xxx.xxx.xxx A dotted-decimal IP network number (15 characters maximum).
Disable When not in use.
The default is Disable.
RTHT= Route Switching Holding Time. This parameter specifies the Route Switching information holding
time value. This determines how often a remote station must refresh its Route Switching
information which pertains to this station.
Valid values: 2 to 20
The default is 20.
TPRn= TCP Port Range. This represents a set of parameters which designate the transmit frame priority
value for a specified TCP port range. n is 1, 2, 3, 4, or 5. The format of this 9-digit hexadecimal
string is:
<PortNumber><PortNumber><PriorityValue>
where each PortNumber is a four-character hex value and PriorityValue is a one-character hex
value. The two PortNumber fields define a starting and ending value that make up a range, with
the starting value less than or equal to the ending value.
Valid values:
PortNumber 0x0000 to 0xFFFF
PriorityValue 1 to 6
There is no default for this parameter.
Appendix E. Novell NetWare Server and LAN Client Driver Parameters
E-3