IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 51 / 113

Windows 98
Windows 98 ships with a device driver for the IBM Token-Ring PCI Family Adapter.
Although the device driver will function with your adapter, it is strongly
recommended that you upgrade to the driver included with this product. Use the
following procedure to install the latest driver instead of the driver supplied with
Windows 98.
Installing the Updated Driver
Use this procedure if Windows 98 automatically installed the default driver for your
IBM Token-Ring PCI Family Adapter. This is necessary if, for example, your
installed Windows 98 on a computer with the adapter installed in the system. This
procedure assumes that the IBM Token-Ring PCI Family Adapter has already been
installed in the computer.
1
Select Start
5
Settings
5
Control Panel. This will display the Control Panel.
2
Double-click System. This loads the System Properties dialog.
3
Select Device Manager.
4
In the Device Manager, expand the Network adapters section by selecting the
+
that appears to the left of the words Network adapters. Select the entry
labeled IBM PCI Token-Ring Adapter,NDIS4, and then select Properties.
5
Select Driver to display the driver information. On this page, select Update
Driver.
6
At this point, the Update Device Driver Wizard dialog opens. This dialog
should contain the following text:
This wizard searches for updated drivers for:
IBM PCI Token-Ring Adapter,NDIS4.
Select Next to continue.
7
On the next page, select Search for the best driver for your device and
then select Next.
8
The next page of the wizard will ask where you would like to look for the
device driver.
¹
If you are installing the device driver from the product CD-ROM, insert the
CD-ROM into the CD-ROM drive and make sure that the CD-ROM drive
checkbox is checked.
¹
If you are installing from a diskette that you built from the CD-ROM or
from the Web, insert the diskette and make sure that the Floppy disk
drives checkbox is checked.
9
Select Next to continue. Windows should find an updated device driver on
the diskette or the CD-ROM. Make sure that The updated driver is selected
on the page and select Next.
10
The next page of the wizard should confirm that the hardware and device
driver are found. Select Next again to begin copying files.
Chapter 3. Software Installation
3-29