IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 31 / 113

1
Create a diskette containing the extracted files from the NETWAREP.EXE file
on the IBM Token-Ring PCI Family Adapter CD-ROM.
2
Be sure that your IBM Token-Ring PCI Family Adapter has already been
installed in your computer. If it has not, follow the instructions in Chapter 2,
“Installing the Adapter Hardware” on page 2-1.
3
Install the latest available Novell patches for NetWare 4.11. Make sure to
select the Version 3.31 ODI LAN Updates for Hardware if given the
opportunity. Return to the server console when the installation is complete.
4
Issue the following commands from the server prompt to bring the server
down, then restart it again:
down
restart server
5
Check to see if the device driver is loaded. If it is, unload it using the
following command: unload ibmtrpo
6
Type load install on the server.
7
Select Driver Options.
8
Select Configure Network Drivers.
9
Select Select Drivers.
10
On the next panel, press the Insert (INS) key to install the unlisted driver.
11
Insert the diskette that you created in step 1; press F3 on the next panel and
specify the path A:\NOVELL\NETWARE.
12
Follow the instructions on the panels to complete the installation of the driver.
If you need to make any custom configuration changes to the driver, do so at
this time.
13
Follow the instructions in the Novell manual
Create an AUTOEXEC.NCF file.
In addition to the instructions in the manual, add the following lines to the
AUTOEXEC.NCF file, immediately after the IPX INTERNAL NET statement (if
necessary, replace C:\NWSERVER with the actual location of the
SERVER.EXE executable):
LOAD C:\NWSERVER\NBI.NLM
LOAD C:\NWSERVER\MSM.NLM
LOAD C:\NWSERVER\TOKENTSM.NLM
LOAD C:\NWSERVER\IBMTRPO.LAN NAME=IBMLS1 DATARATE=M16
Note: There will be existing LOAD and BIND IPX statements in the
AUTOEXEC.NCF. Delete the LOAD statement (we have replaced it with the
stated LOAD C:\NWSERVER\IBMTRPO.LAN statement).
Also, make any needed modifications to the existing BIND IPX statement
(refer to the
Bind the Protocol to the LAN Driver section of the Novell manual
for additional information).
Chapter 3. Software Installation
3-9