IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 27 / 113

For information concerning NetWare server error messages, see Appendix F,
“Novell NetWare Server and LAN Client Driver Messages.”
Server Driver Installation in Existing NetWare 3.12 Server
If Novell NetWare is already installed in your computer, perform the following steps
to install the adapter server device driver.
1
Create a diskete containing the extracted files from the NETWAREP.EXE file
on the IBM Token-Ring PCI Family Adapter CD-ROM.
2
Install the patches obtained earlier now. Make sure to select the v3.31 ODI
LAN Updates for Hardware if given the opportunity. Return to the server
console when the installation is complete.
3
Make sure that the diskette you created in step 1 is inserted in drive A. Enter
the following commands at the server prompt. You might be prompted to
perform a file overwrite; it is OK to overwrite these files.
COPY A:\NOVELL\NETWARE\NBI31X.NLM C:\SERVER.312
COPY A:\NOVELL\NETWARE\MSM31X.NLM C:\SERVER.312
COPY A:\NOVELL\NETWARE\TOKENTSM.NLM C:\SERVER.312
COPY A:\NOVELL\NETWARE\IBMTRPO.LAN C:\SERVER.312
COPY A:\NOVELL\NETWARE\IBMTRPO.LDI C:\SERVER.312
Note: If you experience any problems after loading the Novell NLM files,
check the Novell Web site to ensure that you have the current version of
these files.
4
In the directory where Novell is installed on your hard disk, enter server at
the DOS prompt to start the server.
5
At the server console prompt, enter load install.
6
From the Installation Options menu, select System Options and press Enter.
7
Select Edit STARTUP.NCF File and press Enter. Add the following line to
the STARTUP.NCF file:
Set Minimum Packet Receive Buffers = 48
Note: Increase the minimum packet receive buffers by 48 for each additional
adapter that is installed.
8
Press Esc and then answer Yes to save changes to the STARTUP.NCF file.
9
Select Edit AUTOEXEC.NCF File and press Enter. Edit this file and, after
the
IPX internal net
statement, include the following statements. (Replace
C:\SERVER.312\
with the location of the NetWare server program.)
It is recommended for servers that the DataRate be set to M16 or M4, and
clients be set to Auto. If your system is 100 MB, this parameter is ignored.
The default is Auto.
LOAD C:\SERVER.312\NBI31X
LOAD C:\SERVER.312\MSM31X
LOAD C:\SERVER.312\TOKENTSM
LOAD C:\SERVER.312\IBMTRPO NAME=IBMLS1 DATARATE=M16
BIND IPX TO IBMLS1 NET=<unique net number>
Chapter 3. Software Installation
3-5