IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 60 / 113

Universally
Administered
Address Label
Amber
Green
Figure 4-1. The adapter LEDs and Labels
The LEDs provide information useful for monitoring the status of the adapter and
for problem solving. If the green LED is on and the amber LED is off, the adapter
is operating correctly. If the amber LED is blinking and the green LED is on, a
problem with the adapter has been detected. Table 4-1 indicates the sequence
that will be displayed when the computer is started and the adapter reaches the
open state successfully. Some of the states might be too brief to observe.
Table 4-2 on page 4-5 lists LED states that indicate problems.
Table 4-1. Startup Sequence of LED States
Amber Green Explanation
Blinking Blinking Slow blink
The adapter is waiting for initialization.
Fast blink
The adapter has detected a wake-up frame and is attempting to wake up the system. If
this state persists, it indicates one of the following problems:
¹
The attached PC does not have Wake on LAN enabled.
To correct this problem, power on the PC and enable the Wake on LAN feature from
the power management system configuration menu.
¹
The Wake on LAN cable is not attached correctly.
To correct this problem, ensure that the Wake on LAN cable is properly attached.
Off Off The adapter initialization is in progress, or the computer is powered off.
Off Blinking The adapter did not detect any problems during its self-diagnostic tests and is waiting to open.
If this LED state occurs after the adapter has been opened, this state indicates that the adapter
has been closed under software control.
Off On The adapter is open and operating correctly.
4-4
IBM Token-Ring PCI Family Adapter