IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 37 / 113

OS/2 Novell NetWare Requester
Before installation, copy IBMTRPO.SYS from the CD-ROM or the ODI Drivers and
LAN Client (A) diskette to the root directory containing your Novell NetWare
Requester source files.
1
Refer to the workstation basics and installation manuals from Novell to begin.
When a dialog box titled Requester Installation appears during the installation
process, continue with the following steps.
2
If you are installing the NetWare Requester on a workstation, select Edit
CONFIG.SYS and Copy All Files.... If the NetWare Requester is already
installed on the workstation and only a driver update is needed, then select
Only Edit CONFIG.SYS....
3
On the next panel, specify the name of the adapter driver: IBMTRPO.SYS.
4
When you get to the panel labeled “Copy ODI LAN Driver files,” select Copy
only the default driver.
5
Continue with the installation, following the instructions on the panels.
6
When Installation Complete appears in the Requester window, go to the
Configuration menu and select This workstation....
7
Select Edit to accept the default location for the NET.CFG file.
8
In the edit box titled Current NET.CFG File Contents, type the following lines:
link driver IBMTRPO
SLOT 10001
link support
BUFFERS 8 4096
Notes:
a. See Appendix G, “Novell NetWare DOS ODI Driver Parameters” for a
complete list of parameters that you can specify in the NET.CFG file.
b. To enable source routing, changes will have to be made to the
CONFIG.SYS file. Refer to Novell’s Workstation for OS/2 manual for
instructions on how to enable source routing.
c. The lines in the NetWare Requester section of the CONFIG.SYS file must
be in a certain order. Do not reorder the lines in this section of
CONFIG.SYS. Refer to the Novell manuals for more information.
9
Select Save to complete the NetWare Requester installation.
10
Reboot the computer for the changes to take effect.
Note: To make changes in the NetWare Requester configuration,
double-click the Novell icon on the desktop. Double-click the Install icon in
the Novell window. Go to the Configuration and select This workstation....
Make sure that the correct NET.CFG is shown in the next dialog box and
select Edit. Edit the NET.CFG file in the edit box titled Current NET.CFG File
Contents. When the changes are complete, select Save. It is necessary to
reboot the computer in order to make the changes take effect.
Chapter 3. Software Installation
3-15