IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 20 / 113

5
Connect the Token-Ring cable to the adapter and to the network. See
“Adapter Cable” on page 2-4.
6
Re-connect all cables to your computer and then connect the power cord.
Follow all safety instructions.
Note: In the U.K., by law, the power cord must be connected before the
telephone line cable.
7
Installation is now complete. Go to Chapter 3, “Software Installation” on
page 3-1.
Installing Your Adapter without the Wake on LAN Feature
1
Ensure that the adapter is secure in the PCI slot with retaining screw or other
bracket lockdown mechanism.
2
Re-install all removed covers.
3
Connect the Token-Ring cable to the adapter and to the network. See
“Adapter Cable.”
4
Re-connect all cables to your computer and then connect the power cord.
Follow all safety instructions.
Note: In the U.K., by law, the power cord must be connected before the
telephone line cable.
5
Installation is now complete. Go to Chapter 3, “Software Installation” on
page 3-1.
Adapter Cable
To connect your adapter to a Token-Ring network, you will need one of the cables
illustrated in Figure 2-3 on page 2-5. Cables are not included in the package. The
network end of the cable must be compatible with the network faceplate or other
device to which the adapter will be connected.
Note: No more than one data cable may be connected to the adapter at a time.
2-4
IBM Token-Ring PCI Family Adapter