IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 30 / 113

needed modifications to the existing BIND IPX statement (refer to the Bind
the Protocol to the LAN Driver section of the Novell manual for additional
information).
See Appendix E, “Novell NetWare Server and LAN Client Driver Parameters”
on page E-1 for a complete list of parameters that can be specified on the
LOAD IBMTRPO command in the AUTOEXEC.NCF file.
7
Press ESC and answer YES to save the new file to disk. Press ESC again to
return to the server console.
8
Type the following commands from the server prompt to shut down the server
and exit to DOS: down, then exit.
9
Perform the following COPY commands, making sure that the diskette that
you created in step 1 is inserted in drive A. Note that it will prompt you at
each of the following files to ask if you want to perform a file overwrite; it is
OK to overwrite these files.
COPY A:\NOVELL\NETWARE\NBI.NLM C:\NWSERVER
COPY A:\NOVELL\NETWARE\MSM.NLM C:\NWSERVER
COPY A:\NOVELL\NETWARE\TOKENTSM.NLM C:\NWSERVER
COPY A:\NOVELL\NETWARE\IBMTRPO.LAN C:\NWSERVER
COPY A:\NOVELL\NETWARE\IBMTRPO.LDI
C:\NWSERVER
10
Go to the Novell server directory and enter server at the DOS prompt to
restart the server.
11
Install the latest available Novell patches for NetWare 4.11 now. Make sure to
select the Version 3.31 ODI LAN Updates for Hardware if given the
opportunity.
12
Issue the following commands from the server prompt to bring the server
down, then reboot it: down, then restart server.
13
Installation is now complete. Check for the following conditions to determine
whether the adapter is working correctly and whether installation has been
completed successfully:
¹
The device driver files are loading successfully. There are no error
messages.
¹
The adapter LEDs indicate normal operation. green ON, amber OFF. See
“Understanding the Adapter LEDs and Labels” on page 4-3.
If you experience problems, go to Chapter 4, “Problem Solving.”
For information concerning NetWare server error messages, see Appendix F,
“Novell NetWare Server and LAN Client Driver Messages.”
Server Driver Installation in Existing NetWare 4.11 Server
If Novell NetWare is already installed in your computer, perform the following steps
to install the adapter server device driver.
Note: If you are altering the configuration of a previously loaded adapter, unload
that adapter before proceeding with these instructions.
3-8
IBM Token-Ring PCI Family Adapter