IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 46 / 113

Windows 95
There are two different versions of Windows 95 in distribution: the retail release,
which can be purchased by individuals, and the OEM Service Release 2 (OSR2),
which is found on most computer system preloads. To find out if you are running
the OSR2 release, select Start
5
Settings
5
Control Panel, and then double-click
the System icon. Look at the version number under the text Microsoft Windows 95.
¹
If the number is 4.00.950a or 4.00.950, you are using the retail release of
Windows 95.
¹
If the number is 4.00.950 B, you are using the OSR2 release of Windows 95.
Make sure that you refer to the appropriate installation section for the version of
Windows 95 that you are using.
Before beginning installation, shut down the computer. Make sure that the operating
system is correctly shut down and then switch off the power and disconnect the
power cable from the power source.
If Windows 95 Retail is Already Installed
1
When you boot Windows 95, it will detect the new hardware and bring up a
dialog box to allow a choice of drivers. Select Driver from disk provided by
hardware manufacturer and then select OK.
2
Insert the CD-ROM or the NDIS Drivers diskette into the appropriate drive.
When prompted, enter the path to the driver directory and select OK.
Note: Some of the files on the diskette are located in the DOS subdirectory.
If necessary, you will have to supply this subdirectory to get additional files
copied onto your computer.
3
At this point, Windows 95 might prompt you for network names. Type your
computer’s name and workgroup. Consult your system administrator if you
do not know this information. Select OK to continue.
4
The driver files will be copied. Windows might prompt you for the Windows 95
CD-ROM in order to install its default network protocols and services. Make
sure that the location of your Windows 95 installation files (for example, D:\ or
D:\WIN95 or C:\WINDOWS\CATROOT) appears in the entry and select OK.
5
After the files have been copied, a dialog box will display the following
message:
To finish setting up your new hardware, you must
restart your computer. Do you want to restart your computer now?
Remove the diskette or CD-ROM from the computer and select Yes.
6
Installation is now complete.
Check for the following conditions to determine whether the adapter is
working correctly and whether installation has been completed successfully:
¹
The device driver files loaded successfully.
¹
The device manager (System control panel applet) reports that the device
is working correctly.
3-24
IBM Token-Ring PCI Family Adapter