IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 26 / 113

Note: Increase the minimum packet receive buffers by 48 for each additional
adapter that is installed.
7
Perform the instructions in “Create an AUTOEXEC.NCF file” in the Novell
manual. Add the following lines to the AUTOEXEC.NCF file immediately after
the
IPX INTERNAL NET
statement (replace
C:\SERVER.312\
with the location of
the NetWare server program):
LOAD C:\SERVER.312\NBI31X.NLM
LOAD C:\SERVER.312\MSM31X.NLM
LOAD C:\SERVER.312\TOKENTSM.NLM
LOAD C:\SERVER.312\IBMTRPO.LAN NAME=IBMLS1 DATARATE=M16
BIND IPX TO IBMLS1 NET=<unique net number>
Make sure that the line containing IBMTRPO.LAN has the complete path
name.
Notes:
a. See Appendix E, “Novell NetWare Server and LAN Client Driver
Parameters” for a complete list of parameters that you can specify on the
LOAD IBMTRPO command in the AUTOEXEC.NCF file.
b. If you experience any problems after loading the Novell NLM files, contact
Novell to ensure that you have the current version of these files.
Press Esc and answer Yes to save the new file to disk. Press Esc again to
return to the server console.
8
Shut down your server by entering down and then entering exit from the
server prompt.
9
Make sure that the diskette you created in step 1 is inserted in drive A. Enter
the following commands at the server prompt. You might be prompted to
perform a file overwrite; it is OK to overwrite these files.
COPY A:\NOVELL\NETWARE\NBI31X.NLM C:\SERVER.312
COPY A:\NOVELL\NETWARE\MSM31X.NLM C:\SERVER.312
COPY A:\NOVELL\NETWARE\TOKENTSM.NLM C:\SERVER.312
COPY A:\NOVELL\NETWARE\IBMTRPO.LAN C:\SERVER.312
COPY A:\NOVELL\NETWARE\IBMTRPO.LDI C:\SERVER.312
10
Go to the Novell server directory and enter server at the DOS prompt to
restart the server.
11
Install the patches obtained earlier now. Make sure to select the v3.31 ODI
LAN Updates for Hardware if given the opportunity.
12
Installation is now complete.
Check for the following conditions to determine whether the adapter is
working correctly and whether installation has been completed successfully:
¹
The device driver files are loading successfully. There are no error
messages.
¹
The adapter LEDs indicate normal operation: green ON, amber OFF.
See “Understanding the Adapter LEDs and Labels” on page 4-3.
If you experience problems, go to Chapter 4, “Problem Solving.”
3-4
IBM Token-Ring PCI Family Adapter