IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 49 / 113

7
Select OK in the Device Manager.
8
Remove the driver diskette or CD-ROM. Reboot your computer (select Start
5
Shut Down and select Restart the computer).
9
Installation is now complete.
Continuing Installation of the Driver Using the Update Device
Driver Wizard
1
Select the Update Driver button on the properties sheet. Windows will
display the Update Device Driver Wizard dialog. The dialog box should read
This wizard will complete the installation of: PCI Token Ring Controller.
Insert the product CD-ROM or the the NDIS Drivers diskette into the
appropriate drive.
2
Select Next to search for the drivers. Windows 95 will search the diskette or
CD-ROM drives for an appropriate driver. At this point, the wizard should
state that
Windows has found the following updated driver
for this device.
Select Finish to continue the installation.
Note: If the search fails, select Other Locations. Type the letter of your
drive.
3
Select OK and then select Finish.
4
Although Windows has already found the driver diskette in a previous step,
you might be prompted for its location. Enter A:\ if installing from a diskette or
the letter of the CD-ROM drive.
Note: Some of the files on the diskette are located in the DOS subdirectory.
If necessary, you will have to supply this subdirectory to get additional files
copied onto your computer.
5
At this point, Windows 95 might prompt you for network names. Type your
computer’s name and workgroup. Consult your system administrator if you
do not know this information. Select OK to continue.
6
The driver files will be copied at this point. Windows might prompt you for the
Windows 95 CD-ROM in order to install its default network protocols and
services. Make sure that the location of your Windows 95 installation files (for
example, D:\ or D:\WIN95 or C:\WINDOWS\CATROOT) appears in the entry
and select OK. You might also be prompted again for the location of the
driver files. Enter the appropriate location again as described previously.
7
After the files have been copied, a dialog box will display the following
message:
To finish setting up your new hardware, you must
restart the computer. Do you want to restart your computer now?
Remove the driver diskette or CD-ROM from the computer and select Yes.
Chapter 3. Software Installation
3-27